00 44 (0) 1684 290077

Tags: Coolant, Pump, Kit, Air, Operated, Vacuum, Hose, Coolant Pump Kit Reversible

Coolant Pump Kit - Air Operated - Reversible

£572.00
  • Product Code: air-operated-reversible-coolant-pump-cpk
  • Availability: In Stock

S.ID PUMP – REVERSIBLE - Metal     (Siphons Into Drum)             &nb..

S.ID PUMP  REVERSIBLE - Metal     (Siphons Into Drum) 


                    


     

    1.       Compressed Air. Max. 2.5 Bar. - SID PUMP REVERSIBLE  driven by compressed air. Tested and set to maximum safety pressure (in drum) of 0.25 Bar, with a running pressure of 2 Bar. This is secured by a pilot valve inside the unit. The pilot valve must be checked on a regular basis (e.g. every 6 months). This is very easy to check – by unscrewing the top and push with a finger on pilot to check that it manoeuvres freely. Maximum Operating Pressure: 2.5 Bar Recommended Operating Pressure: 2 Bar. 

                 Suction / Reverse Unit provided with:

    1.        Ball Valve

    2.        Reverse Button

    3.        Exhaust Filter

    4.        Flood Stop (protects against flooding)

    5.        Riser Pipe (Cut to appropriate length)

    6.        Tube bending / Adaptor

    7.        1.5 metre hose

    8.        Transition Piece

    9.        Extension Tube

    10.    Corner mouthpiece

    11.    Floor / Tank mouthpiece

     2.     When button is pushed down, the pressure builds up in the barrel. Set to maximum pressure of 0.25 bar cussed by the build-in pilot valve. Pilot valve must be checked on a regular                  basis. The pilot valve can be easily checked by unscrewing the top and see if it is working freely by carefully pushing with your finger. If not moving freely, it must be repaired or                        replaced.

    3.       Exhaust. Not to be blocked. If noise increases, the exhaust filter must be changed.

    4.       Safety Valve. Make sure the barrel is not over filled. Make sure valve manoeuvres correctly.

    5.       Pipe for fluid reversing. Pipes push together. Lube gaskets with water when mounting. Shorten pipes to 2-5mm less than 2” RG thread to bottom. Cut 35-45° for better flow.

    6.       Pipe bending / extension for 2” RG. 

    7.     Hose.

    8.       Mount piece (hose extension pipe).

    9.       Extension pipe.

    10.   Suction piece for small corners.

    11.   Floor/Tank suction piece.


    Maintenance:

    Unscrew the top to see if working freely by carefully pushing with your finger. (Factory tensioned to 108g. for max pressure in barrel 0.25 Bar).

     Important:

    It is important to check the pilot valve on a regular basis to prevent too high a pressure in the barrel. Check Pilot Valve every 6 months or after every reversal.


    Write a review

    Note: HTML is not translated!
        Bad           Good