Tektrak Cloud Login
potable water, boilers and engine cooling systems
Don't have a Login ? Contact Us
tektrak Industrial Testing Kits & Accessories:
Good quality coolant products and accessories one-stop shop for testing & test kits & equipment for the Metalworking Industry includes IP Test Materials (PERA) IP287 & IP125
Our range of products covers all aspects of cutting fluid control, testing and monitoring including coolant pumps, RBS metalworking coolant dipslide and MBC control products for MW5 compliance.
Buy Dipslides & Dipslide Incubator Now - go to our SHOP-speedy delivery Only £8.40/Box!
Engineering & Metalworking
Metalworking products include coolant recovery pumps, refractometers, coolant transfer, swarf suction guns and blow guns, pH papers, hardness testing, PERA IP test materials, chlorides, refractometers, all products to assist with sump management and the elimination of bacteria and smells in sumps.
Our range of Belt and Disk skimmers are designed to combat tramp oil problems in sumps, easy to use and install.
Marine System & Fresh Water Testing
SHIP Testing Products: Our marine and ship testing products for commercial ships and leisure boat and yacht market (see aquamarinedirect.com for small pack chemical products) for:
1. water quality for drinking and potable water with water testing kits for maintaining water quality (see shipsan.co.uk), water purification tablets, water hardness testing, chloride testing and dosing kits, to meet water quality standards of WHO and local authority etc.
2. marine market and ship testing kits and testing equipment for potable or drinking domestic water, marine boiler water, marine engine coolant and other merchant ship testing requirements under MLC2006, Ship Sanitation Certificate, ILO, CDC, MCA, & WHO
Marine Incubator specifically to meet Legionella Compliance and monitoring water conditions so that suitable measures can be taken based on up to date results reducing the risk of Legionella bacteria growing in cooling water systems.
This Marine Incubator is fully equiped to be capable of carrying out 4 tests and includes an incubator.
Key Features of Incubator
18 Dipslide Capacity
Compact and convenient design
Can be stood horizontally or vertically
Transparent PVC Door for easy viewing
Dipslides are visible without removing
Temperature range: 25-45°C
Accurate temperature control ±1°C
240V power supply
The incubator has a capacity to incubate 18 dipslides and the temperature can be adjusted between 25 and 45°C. The incubator has a transparent door which allows easy observation of the dipslides contained inside. It has an easy to remove tray which holds the the dipslides in place.
The incubator is compact and can be located in a horizontal or vertical position so as space can be utilised efficiently. It has been specifically designed for those treatment engineers who have a routine requirement to monitor a small number of cooling tower and it looks good in an office as well as a plant room. Its functional clear door makes regular monitoring very convenient.
This dipslide incubator can be set up in no time at all, using the as the incubator is factory set to 30°C, just plug it in and switch it on. It will be at 30°C in 30 minutes. Running on 220/240V mains electricity it is protected by an internal fuse and has over-temp protection for safe extended use.