Air Cooler Cleaner Dosing & T/C Compressor and Intercooler washing & cleaning Injector
The ACC Injection System forms a complete dosing system for the dosage of a cleaning agent for the charged air inlet of a charge air cooler.
The product is injected by a mist jet nozzle that produces very fine droplets of ± 100 μm at 5 barg. After injecting the cleaning agent, it is to be recommended to flush with water. The system consists of a carbon steel epoxy coated dosing pot with a contents of 2.5 Ltrs, equipped with a filling funnel, air inlet valve, a pre-set pressure relief valve (8,5 barg), drain valve, and two discharge valves.
The system is also equipped with a mounting bracket.
Please ask for full information for this product including installation instructions and for specific applications.
The system is designed to be used with most engine types
Full spec sheets dosing instruction and information available on request.
Supply: The Air Cooler Cleaner Dosing Unit is supplied separatelyy to the dosing injectors. Please specify how may injectors required and the engine details. We will
always confim this by order confirmation.
2.1. a) Air Cooler Dosing Unit/pot NSN J150-7920-99-553-4055
2.1. b) Air Cooler Injector NSN J150-4730-99-958-6080
Please Note: Powder System also available, please state at the time of ordering which you require.